What are your dream plans...

[XEON]

List your dream plans for your rig!

Mine are:
Take everything out of Jeep. Strip the whole Jeep. Get frame and tub media blasted and painted
V6 Vortec Swap
NV4500 Tranny
4-1 T-Case
Dana 44s around
Roll 37's
Tub lined, dash new with all new gauges and other misc stuff :)

[NYWheeler]

a dirty,ugly jeep with a big motor big axles and big tires

[XEON]

a dirty,ugly jeep with a big motor big axles and big tires
Yea its a dream in the works though :). Your goal was wheeling in August, whats the status?

[sentinal02]

hmm, let's see.

4.7 stroker
Atlas case, probably 4.3
NV4500 (though with the atlas i might just go 3550 since granny gear with the 4500 would be kinda redundant. not to mention a lot lighter and it would still bolt up to the engine without an adaptor)
full width axles, HP D60 front, could go either way in there rear, D60 or 14 bolt
38" tires, selectables front and rear
OBA/OBW
custom half top
custom dash
oh and some gun metal stainless trim for bling :lol: nothing wrong with a muddy jeep, but i do love to have mine sparkling once in a while

[bondo303]

Well, my TJ is just about where I want it to be. I still need to do a couple of more things for now, like regearing and getting a better rear axle. But my dream rig would be to restore an old flat fender CJ2A, CJ3A OR CJ3B, which is going to happen I hope within the next few years.

-Bondo

[ROCKREADYXJ]

I dream about having more hours in the day! I plan on finish all my projects. But first I need my dream to come true than all will fall into place.

[rockdawg]

My dream plan usually starts out with Anna Kournikova and me in a big bad wolf costume.

[dmxjg35]

My dream plan usually starts out with Anna Kournikova and me in a big bad wolf costume.

:lol: :lol: :lol: any dream with anna is a good dream to me

[NYWheeler]

a dirty,ugly jeep with a big motor big axles and big tires
Yea its a dream in the works though :). Your goal was wheeling in August, whats the status?

August is not going to happen but september is looking pretty good. Like Joe said, not enough time in a day.

[Freebird01]

once i find myself a job i can stand to be at for more then an hour id like to get both my zuks up to snuff so i quit breakin sheeeeeet....

AND HAVE SOMEONE BUY MY CJ5 PARTS!!!!!!!


and after all of that id like to get my garden shed built...my chimney finished...and get my rock buggy built!!!

[flippy71]

a snorkle for when i'm for submarine'ing in the pines, a turbocharger that i seen at www.505performance.com, and just 1 of those 10 million dollar lottery tickets :D

[ROCKREADYXJ]

id like to get both my zuks up to snuff so i quit breakin sheeeeeet....







get a jeep no birfields!

[Freebird01]

id like to get both my zuks up to snuff so i quit breakin sheeeeeet....







get a jeep no birfields!

havent broken one of those yet...i keep fubaring the t-case and eatin front brake hoses

[ROCKREADYXJ]

i keep fubaring the t-case and eatin front brake hoses

OK ATLAS!!


I have no idea what you are doing to break hoses. Can't you just put your feet down and stop that thing?


lol

[Freebird01]

LOL...im not breakin them....they are so long they are rubbing my tires and i keep rubbing them through...

i now have a set of the stainless steel braided teflon coated hoses...

im going to try and redo my springs(screen door) so the pull them more away from the tires...

[Lagooz00xj]

a snorkle for when i'm for submarine'ing in the pines, a turbocharger that i seen at www.505performance.com, and just 1 of those 10 million dollar lottery tickets :D

except when u submerge that turbo which would be hotter than all hell and bad things start happening.

as for my dream... 4.6L stroker and a vortech supercharger, H.D. NP242, 44/super 30 w/ ORO's U turn steering conv., 35" MT's, Hanneman Fiber Bulge Fenders, 6" w/ full traction LA's, hydro-assist, fully armored with a winch mount prerunner bumper.

[ROCKREADYXJ]

I want a Barbie hot pink electric jeep. I think I can hit Rattler and Pick your poison with it. They have serious a serious amout of flex!


http://www.ie4w.com/Emilys_Jeep.JPG

[mybigredjeep]

those are the new swampers on that thing right? i want those for my rig

[ROCKREADYXJ]

Those are a real good set of matched tires specialy designed for living room and kitchen special ops manuvers. The are made from high tech space age plastics capable of running 0psi!!

And yes that is a portal axle in the rear. W/ a lockrite

two speed transfer case foward and reverse.

Oversized barbie roll bar.

custom bumper w/o winch.(because at 33 pounds you can go anywhere!)

[Lagooz00xj]

That rig is sweet. except the steering looks a little iffy, Might wanna upgrade, from what i hear the factory setup is pretty weak, and prone to contacting obstacles.... Hi-steer?????!! :lol:

[mybigredjeep]

i cant tell from the pic but is that the barbie unlimited or just a barbie-J

[mybigredjeep]

i guess the barbie jeep would be a BJ lol

[JeepySterLou]

I think it needs one of those TRC 4" long arm kits, I hear they are real good!! :ontopic:

[ROCKREADYXJ]

Here it is on the RTI ramp thats well over 1100.



http://www.off-road.com/nissan/trails/SF2001/gallery/DSCN0114.jpg

[Lagooz00xj]

Joe i think u might wanna check out this site.

http://ungn.net/powerwheels.html

[XEON]

Hey great, thread is pointless now... Thanks

[ROCKREADYXJ]

Lagooz pretty cool site that guy has a lot of time on his hands!

[Redhead4wd]

i'de like to pop my trucks cherry at paragon with all you guys...

[JeepySterLou]

i'de like to pop my trucks cherry at paragon with all you guys...


As would I

[Lagooz00xj]

Lagooz pretty cool site that guy has a lot of time on his hands!

:lol: :lol: :lol:

[matt6669]

sasha you should of come with us last month, we had a blast, and the trails we did, deffs would of popped its cherry without a doubt :shock:

but that powerwheels site, that guy has way to much time man, hahah but thats probs gonna be me when i have kids

plans hmmm lets see you need to have money in order to have plans and i just gave joe all my money soooo i don't have plans

[XEON]

You dont have to have money to have plans... this is dreams...

[SleepRob89]

just to finish my jeep before june 28 2006 bc thats when i get my license yes i dont have it yet but i love cars and truck been working on them for ever i go to school for it also so its all good

[SleepRob89]

http://i22.photobucket.com/albums/b312/89wrangler/th_6.jpg (http://i22.photobucket.com/albums/b312/89wrangler/6.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_5.jpg (http://i22.photobucket.com/albums/b312/89wrangler/5.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_42.jpg (http://i22.photobucket.com/albums/b312/89wrangler/42.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_4.jpg (http://i22.photobucket.com/albums/b312/89wrangler/4.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_3.jpg (http://i22.photobucket.com/albums/b312/89wrangler/3.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_2.jpg (http://i22.photobucket.com/albums/b312/89wrangler/2.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_fd9141a1.jpg (http://i22.photobucket.com/albums/b312/89wrangler/fd9141a1.jpg)

[LoneRanger]

Doode, that power wheels site is the shnizzle, but why not put in some brushless motors, and make it go 20+mph? :mrgreen:




L.R.

[SleepRob89]

http://i22.photobucket.com/albums/b312/89wrangler/th_6.jpg (http://i22.photobucket.com/albums/b312/89wrangler/6.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_5.jpg (http://i22.photobucket.com/albums/b312/89wrangler/5.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_42.jpg (http://i22.photobucket.com/albums/b312/89wrangler/42.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_4.jpg (http://i22.photobucket.com/albums/b312/89wrangler/4.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_3.jpg (http://i22.photobucket.com/albums/b312/89wrangler/3.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_2.jpg (http://i22.photobucket.com/albums/b312/89wrangler/2.jpg)
http://i22.photobucket.com/albums/b312/89wrangler/th_fd9141a1.jpg (http://i22.photobucket.com/albums/b312/89wrangler/fd9141a1.jpg)

looks nothing like this now alot better its going for paint at the end of november ill have newer pics at the end

[Halo Performance]

Dreams for my XJ:
8" front and rear coilovers
upgraded locked front and rear axels
36" rubbers

Nothing too major

[matt6669]

Dreams for my XJ:
8" front and rear coilovers
upgraded locked front and rear axels
36" rubbers

Nothing too major

I would do exactly what your doing except i would do 6.5 front and rear coilovers with 35" rubbers. Lower cog is always king.

Matt

[Halo Performance]

True, low cog is a great thing, but if you go wide enough...

It's just a pipe dream at the moment. Don't have nearly enough cash to even start putting together a list of parts. Gotta save up for a DD first.

[Chris 88 YJ]

I spent 14 months and who knows how many thousands of dollars building my jeep from the ground up, tearing it apart to paint everything then putting it back together again. All I want to do is wheel it!