Sway bar

[mybigredjeep]

ok so i think i found what the death wobble is being caused by.............my sway bar mounts............im going to pull them out and replace them but first i need to know how to do that...........is it just the apparent four bolts that hold that bushing on? and how does the new ones go on? thanx to anyone that can help me out and if you wanna stop by im going to be doing it tom. durring the day and prob sat to......if i dont finsh tom.

Jeremy

[Cris_XJ]

is it just the apparent four bolts that hold that bushing on? and how does the new ones go on?
Jeremy

Hey Jeremy ,yes that's all there is the 4 bolts ...they go in the sameway ...front or rear sway bar?? I pull my rear out of the Jeep is not really needed on highway but you get a lot more flex when offroading >>also the shaking could be the transfer case due to the lift , that's what I have between 45 and 50 mph but is going to get fix monday with a 1" TC drop .

[mybigredjeep]

My ome Steering staybalizer came in today............it will be installed on sunday..................im excited..................woot woot

[ROCKREADYXJ]

That will only dampen you steering wobble that is usually from misalignment bad steering components. Never seen a sway bar cause it. How are your ball joints? How about the tie rod ends when was the last time you had it aligned?

[dmxjg35]

track bar? in the front? i know when i first put my lift on the steering was iffie with the relocating bracket, i put on a re hd track bar and its much better.

[ROCKREADYXJ]

Do you have adjustable control arms? sounds almost like you need more caster or the toe is off.