My XJ

[njedgexj]

http://www.the-jersey-devil.com/photopost/data/500/479800x600-med.jpg


here is my rig...pic taken from last paragon trip...

[njedgexj]

http://www.the-jersey-devil.com/photopost/data/500/479IMG_0727_32_1_1-med.jpg

[XEON]

Hey wow! That is sweet. Lots of Hellas I LIKE! :D

[badzook]

Hey,
njedgexj do you have an Sye kit? What brand is it and do you like it?
Are you locked up?
Just wondering. I'm in the middle of building up an JX and am looking for input.

thanks
badzook

[njedgexj]

no i got away with some 6 degree shims...some ppl have issues some dont...i was lucky...im not locked up yet...this spring i plan on swapping in the parts to make my lift the 5.5 extreme duty kit...and gettin some 33's....then ill re-gear and put a locker in the rear...

[XEON]

I shotty your tires... if they still have thread... :D

[njedgexj]

once i go up to in lift for the 33's ill need the sye...not sure what kind im gonna get...im really lookin into the nvg241or from the rubicons...pretty much a direct bolt in..and it already has the sye built in..and the 4:1 is real nice...i was thinkin of puttin the tera low 4:1 kit in my exisiting 231 t-case and installing a sye...but its actually cheaper to buy the 241 new...if u have the 231 u can go with the RE hack and tap method..ive heard thats cheap method and seems to work well and alot easier to install...for the advanced adapters ull need to take apart the tail section of the t-case..

[badzook]

Thanks for the info...


I have the 242 TC and will need a yoke set-up. I've got vibes at 30 mph and up. Waiting for the parts now...
badzook