90 Wrangler built [Archive]

NYWheeler

03-13-2005, 12:49 PM

I have it up for sale locally but I figured I'd put it up here too. 1990 YJ 350tpi 700r4 tranny np231c transfer case 8.8 rear axle with factory LS and disc brakes d30 front with aussie locker SOA shackle reversal 1inch body lift 37"X-Terains MT classic II rims with a full size spare of the same aluminum dash board with autometer gauges 28gal gas tank Mastercraft driver seat half soft top much more.

I'm asking $6500 locally but I really need to get $5500 for it.

I'll try to get some pics up today. You can also look on the gallery to see some pics. PM me to contact me.

NYWheeler

03-13-2005, 12:51 PM

I almost forgot, I WILL NOT SELL ANY PARTS SEPERATE SO DON'T EVEN ASK!

NYWheeler

03-13-2005, 06:34 PM

http://img.photobucket.com/albums/v363/liinstaller/324a4ace.jpg
http://img.photobucket.com/albums/v363/liinstaller/55635a66.jpg
http://img.photobucket.com/albums/v363/liinstaller/ec37a220.jpg
http://img.photobucket.com/albums/v363/liinstaller/7ce5049f.jpg
http://img.photobucket.com/albums/v363/liinstaller/9cd9af0c.jpg
http://img.photobucket.com/albums/v363/liinstaller/100_0276.jpg
http://img.photobucket.com/albums/v363/liinstaller/78b31e44.jpg
http://img.photobucket.com/albums/v363/liinstaller/dbee3463.jpg
http://img.photobucket.com/albums/v363/liinstaller/100_0279.jpg

http://img.photobucket.com/albums/v363/liinstaller/100_0279.jpg

bondo303

03-13-2005, 06:39 PM

Tom, I fixed the pics for you, Why are you selling it?

-Jon

http://img.photobucket.com/albums/v363/liinstaller/324a4ace.jpg
http://img.photobucket.com/albums/v363/liinstaller/55635a66.jpg
http://img.photobucket.com/albums/v363/liinstaller/ec37a220.jpg
http://img.photobucket.com/albums/v363/liinstaller/7ce5049f.jpg
http://img.photobucket.com/albums/v363/liinstaller/9cd9af0c.jpg
http://img.photobucket.com/albums/v363/liinstaller/100_0276.jpg
http://img.photobucket.com/albums/v363/liinstaller/78b31e44.jpg
http://img.photobucket.com/albums/v363/liinstaller/dbee3463.jpg
http://img.photobucket.com/albums/v363/liinstaller/100_0279.jpg

NYWheeler

03-13-2005, 08:31 PM

Thanks for fixing the pics. I'm selling it because I want to build a trail only jeep. I figured it would be easier to start from scratch rather than pulling mine apart and having all kinds of parts laying around.

Flendo

03-17-2005, 11:19 AM

might be cheaper to part your jeep out and use yours as a the platform

NYWheeler

03-17-2005, 07:04 PM

Yeah I've been thinking about it. If it doesn't sell in three or four weeks than I will be parting it out. Everything will be up for sale except for the tub and the frame.
[/quote]

travieso

03-17-2005, 07:20 PM

Tom if you do decide to part it out I might be interested on the 8.8 rear axle d30 front

XEON

03-17-2005, 08:13 PM

NY I shotty that front locker :D

Flendo

03-17-2005, 09:43 PM

dibbs on the metal storage locker

NYWheeler

03-17-2005, 11:06 PM

WOW looks like I have to part it out. I'm going to buy an XJ to wheel while I build my YJ. As soon as I start the disassembley I'll let you guys know
Parts list:
350TPI with computer and Painless wiring harness
700r4 with converter
np231c with SYE
AA motor mounts
Be-Cool aluminum radiator for sbc in YJ
d30 with aussie locker 4.56's no steering knuckles SOA or SUA
8.8 with 4.56's disc brakes LS parking brake cables u-joint adapter SOA
Teraflex steering correction for 6+inches of lift
28 gal gas tank for external pump
Tuffy jumbo security drawer
Misc other stuff as I think of things.

XEON

03-17-2005, 11:13 PM

How much for the whole engine and tranny? I might be interested. But I have a question :). Whats the MPG on that beast? If I wanted to get a manual what tranny would I put in it? Let me know thanks Tom!

NYWheeler

03-17-2005, 11:28 PM

$1000 motor tranny and transfer case ready to drop in with motor mounts computer and harness. $1250 with radiator. Also includes all pulleys and pumps etc. I have March Performance pulleys and brackets. Motor has about 20,000 miles on it. I get about 13mpg with a very heavy right foot.
I don't know what manual tranny would bolt up.

Flendo

03-18-2005, 12:03 AM

what about Tuffy jumbo security drawer

NYWheeler

03-18-2005, 12:21 AM

$150 for the security drawer. Still in great shape. It's a great piece, I would recomend their products to anyone.

travieso

03-18-2005, 12:27 AM

Tom how about the 8.8 rear axle d30 front how much for both?

NYWheeler

03-18-2005, 12:36 AM

I don't know what truck you want them for but they are set up for leaf springs. The 8.8 you can buy a bracket kit for coil springs but if you want the front for your jeep too than your better off just taking the carrier ring and pinion. Just let me know what they are going into.

travieso

03-18-2005, 12:55 AM

they are not for me its for my buddy he has a 91 YJ and he was planning to regear I wanted to run this by him to see if it interest him.

mybigredjeep

03-18-2005, 02:52 AM

would ur sye help my truck at all?

NYWheeler

03-18-2005, 06:51 PM

$600 for both including the locker. The only thing thats not going with it is the steering knuckles for the front. It includes the extended brake lines too.

Jeremy if you have an NP231 transfer case than you can use it. You can use my driveshaft also, you just have to extend it a little longer. I have a real good driveshaft shop I use on the Island. $150 for both.

Justin, I'd like to keep the axles complete but if I can't than the locker is yours.

XEON

03-18-2005, 07:01 PM

Justin, I'd like to keep the axles complete but if I can't than the locker is yours.

Thanks Tom your the man!

NYWheeler

03-18-2005, 07:06 PM

Flendo

03-18-2005, 11:20 PM

Flendo, the tuffy drawer you can have when ever you want it. It's only four bolts to pull it out. I don't know what kind of jeep you have but I have a set of YJ full doors I was going to throw out but you would have to swap your mirrors over so you can pass inspection.
yes i want it....when can i pick it up...i have a 1988 sahara and a 1997 sahara so i'll take the doors too..... 150 right???

travieso

03-19-2005, 12:16 AM

Thanks Tom I will take them both sent you a pm

NYWheeler

03-19-2005, 03:20 PM

SYE and driveshaft are sold.
Tuffy drawer is sold.
Both axles should be sold.

travieso

03-19-2005, 05:04 PM

both axles are definitely sold. :D

NYWheeler

03-19-2005, 07:09 PM

I will also have a Posi-Lock for the axle disconnect $35
If anyone wants just the TPI off the motor let me know, I will break the motor apart.

Toytrk85

03-27-2005, 01:42 PM

Saw you started parting your truck out. What are you asking for the tires, I dont need the rims but if you dont want to seperate I'll take the set. Please let me know. Very interested.

Nick

NYWheeler

03-27-2005, 02:57 PM

I want $600 for all five rims and tires. I rather not seperate because I don't have access to a tire machine that will break down a tire that big and I don't want to destroy the tires. 37x13.5x15. About 70% tread on four and one has never seen the road or dirt. Buy the set, sell the rims and you just got a geat deal.

Flendo

03-27-2005, 03:11 PM

mybigredjeep

03-27-2005, 05:15 PM

they are sweet take the deal man!!!!

Toytrk85

03-27-2005, 05:20 PM

You can consider the tires and rims sold. When will you be around this week so I can pick them up? Could you send me your address and possibly directions from North Jersey (Mahwah) to Toytrk85@aol.com. Thanks again.

Nick

NYWheeler

03-27-2005, 09:10 PM

Travieso, the axles should be out this weekend. There the only thing left on the jeep except for the body. Everything else came out the past couple of days.

travieso

03-27-2005, 09:29 PM

sounds good I will pm you tomorrow to let you know when we could get them by the way where in long island are you at.

NYWheeler

03-27-2005, 09:50 PM

I'm in Suffolk county exit 62 on the LIE.

travieso

03-27-2005, 10:07 PM

not bad about 1 hour away from use

Flendo

03-28-2005, 12:01 AM

not bad about 1 hour away from use
once you pass the queens midtown tunnel NYWhe is only about 30-40 minutes from there....very easy drive.....

Toytrk85

03-31-2005, 02:39 PM

Thanks Tom,
Cant wait to get the tires on my truck. Thanks so much for sticking around and helping rearrange those tires at 7-11. If everyone on this board is as nice as you are I know I'll have a great time wheelin. Thanks again.

Nick

NYWheeler

03-31-2005, 09:37 PM

Thanks for the kind words Nick. Hope to see you on the trails with the tires.

XEON

03-31-2005, 09:45 PM

I think this post is needed :D

PICTURES TOM PICTURES!!! We want to see pictures of the new rig :D And your striped down YJ :)

You can post the images on our gallery... if you dont know how ask :D

NYWheeler

03-31-2005, 09:52 PM

I haven't had any time. I'll see what happens this weekend, if I have time I'll snap some pictures and post them.