New to "The Group"

[Kledder]

Just wanted to introduce myself. I roll in a 93YJ. Wheel paragon and Rausch often. I'm formerly from Sussex County, NJ and before that Roselle Park. Now living in Milford, PA. Give me a shout if anyone is in the area or if you want to wheel.

Kevin

http://www.ok4wd.com/write/rides/248/large/scan0002.jpg

[XEON]

Hey and welcome! Nice YJ! What are the specs? Hope to see yuo on the trails!

[mv420xx]

welcome, i used to live in Milford, lots of places to wheel, check out 5 mile meadow road off 739 near lords valley, its actually 7 miles long, enjoy...

[Kledder]

Hey guys, thanks for the welcome. I'll have to check out that spot off of 739. Really just starting to learn the lay of the land. Specs on the YJ are below.

93YJ
4.0L
NP435
Atlas II 4.3
Tom woods shafts
Currie high pinion 9in rear 4.10s ARB
Waggy 44 front Alloy shafts 760 joints mini spool
Walker evans w/ 37 krawlers
Whaley Enterprises Cage, stinger and fender bars
SOA on 2.5in BDS

[SleepRob89]

-=WELCOME=-

that is 1 F**kin nice YJ

[Kledder]

Rob, thanks for the compliment. Stick with wrenchin' man. I bought my YJ at 16 with a 3 inch lift and 33's and back when I didn't even know how to change oil. I'm 25 now and It has gone through many stages of build and rebuild all done in my own garage. Between wheelin', building trucks, joining clubs and now competing I've met some great people. This seems like a pretty cool site with alot of local Jersey/PA people. Great to see the local support. See you guys on the trail.

Kevin

[GreenMachine]

I used to live over in Port Jervis, but now I'm living up in Monticello. Not all tha far from you. Nice looking rig by the way!

[Kledder]

GreenMachine. Thanks. I have wheel up in Monticello a few times on some private land and also some random property as well. Been to Big Willy's a few times too. Pretty sure that is a Monticello hot spot. Give me a shout if you guys are wheelin' up that way. Thanks again.

Kevin

[GreenMachine]

Mr. Willy's is two miles from my house. I live out in Sackett Lake actually. Make that turn between Mr. Willy's and the bar and that takes you out to my place.

[cj8mike]

Yo Kevin What's up there? We have to get togeather again soon. Got some more trails to cut and watch Rob try and roll on :)

[Kledder]

GreenMachine, I know exactly where you are. I have wheeled up there with OK4wd a few times. Cool area.

Mike, good to see I'm not the only one lurking on the boards. Let me know next time you guys are doing some trail cutting. I finally moved in the new house in Milford, so I am only about 20 minutes from your property. I can't wait to get back out, but I'm trying to do a tranny swap in the next month or so. Hey did Rob tell you about the Moab trip?

Kevin

[cj8mike]

I think early March i am going to cut some more. I have a group of scramblers coming in april and a reporter from low-range.

Would love to go out west but Deb and i are expecting a new jeeper to family in July. It seems we only get the long distance trips every 2 years. Although we are still thinking of going back to the trail ride in ontario again at end of august.

So Its time for you to start rv shopping ?

[Kledder]

Mike, congrats on the new addition. Let me know more about the Ontario trip when we get closer. I've never wheeled Canada before. Keep me in the loop as far as trail cutting. I would be glad to help out however I can. As for the RV, I'm trying to make it through this year with the open car tag, but next year I hope to be in a 40' enclosed gooseneck with living quarters. Gotta get the wifes jeep paid off first though.

Kevin